FDA Epoxy, Medical Grade Adhesive, Two Part, Best Epoxies, AA-Bond FDA8, 10ml Easy Mix Kit

AA-BOND FDA8 EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300. This highly conductive system is available an easy to mix and dispense system with extra dispensing tip. GENERAL PROPERTIES: Appearance Amber Cure Type Heat cure Benefits Low viscosity Easily mixed Effective electrical insulator Low permeability to gases and vapors Mix Ratio by weight 100:100 / Resin:Hardener Operating Temperature -60 to 145 °C Typical Applications FDA Grade Applications, food packaging, indirect contact with food and medical applications UNCURED PROPERTIES: Viscosity At 25 °C 1,500 (After Mixing) Thixotropic Index 1.0 Specific Gravity, mixed 1.11 Reactive solids contents, % 100 Pot Life 45 minutes CURE SCHEDULE: 4 hours At 65°C 24 hours At 25°C CURED PROPERTIES: Hardness, Shore D 65 Dielectric strength volts/mil 410 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information.

• Spec. Gravity 1.11 g/cc Mixed Viscosity 1500 cP After mixing Pot Life 45 minutes Appearance Amber
• Hardness,Shore D 65 Adhesive , cure type room temp or heat cure
• Volume Resistivity 1e+14 ohm-cm Dielectric Constant 3.35 At 1000 Hz Dielectric Strength 410 kV/in
• Maximum Service Temperature, Air 293 °F Minimum Service Temperature, Air -76.0 °F
• Thixotropic Index 1.0, Cure Time 4.00 hrs At 65°C 24.0 hrs At 25°C